Digicams: It's all about the sensor size

Mon May 11, 2009 2:05PM EDT

See Comments (6)

A 12-megapixel camera is better than a 10-megapixel camera... right?

Megapixel madness has cooled off in recent years, but the question and the confusion are still out there: How many megapixels are enough? And it can't hurt if I get a few million more, can it?

This insightful post at the Christian Science Monitor offers a counterintuitive answer to the latter question, suggesting that, yes, squeezing too many megapixels into a tiny camera can actually leave you with a lesser quality image than you'd get with a lower-megapixel one of the same physical size.

The problem is the size of the CCD sensor, the chip inside the camera which actually captures the image when it's exposed to light and which then converts it into a digital file.

The problem is that a CCD sensor has to be kept very small in order to keep the size of the camera that contains it to a reasonable size. Pocket cameras about the size of your wallet are now the norm, so unless you want to upgrade to a bigger, bulkier model, there's only so big a CCD can get. (And bigger CCDs also cost more, of course.)

In order to raise the number of megapixels the camera is rated for, manufacturers can cram more resolution into that sensor. This is easier said than done, and the result is often that images may be larger in size, but lower in quality, as, says the piece, "the overburdened sensor can lose sharpness, struggle in low-light situations, and add 'noise' (small blotches or odd colors)."

How can you arm yourself informationally when shopping for a camera? First, sensor size may not be on the front of the box, but it is usually available in the fine print, especially if you look for information about the camera online. The catch is that sensor size is described in a very bizarre way: Many pocket cameras have a 1/2.5" sensor, which is smaller than the less commonly available but "better" 1/1.7" sensor. Scroll down on this page to the section on Sensor Size and you'll find a list of common sensor size names and the actual overall height and width of that sensor. In the case of sensor size, bigger is always going to be better.

And of course, you don't need as many megapixels as you think. The size of physical prints you'd ultimately like to make is the key for most users. This calculator will let you do the math the easy way: An 8.0-megapixel camera will let you print at 300dpi a photo that's over 8x10 inches in size without losing any clarity from the photo. Even a garden-variety 5-megapixel camera can print a 5x8" print at 300dpi with no trouble. But 10, 12 megapixels? You simply aren't likely to ever need that much.

Comments on Digicams: It's all about the sensor size

Post a Comment

Join in the discussion. Here you'll see the comments in the order they were posted.

  • 1 Posted by _stormy on Mon May 11, 2009 3:48PM EDT Report Abuse

    Thank you, very informative. My daughter and I were discussing digital cameras just yesterday and wondered about this.

  • 2 Posted by jajohn11 on Mon May 11, 2009 6:16PM EDT Report Abuse

    The real virtue of high pixel counts comes when you crop the picture before printing. If you crop that 5 megapixel image to print only 1/4 of it, you are essentially printing a 1.25 megapixel image, so you will lose quality even at 5x8. Which makes me wonder how many consumers do that; I'd guess a substantial number considering that the most of the freebie software included with most cameras can do that, but that's only a guess. My wife is into bugs and flowers, so it isn't unusual for her to make prints from a small portion of the image. If you're not one of those people, though, I think Christopher is dead on about looking beyond resolution.

  • 3 Posted by acemtrx on Tue May 12, 2009 10:21AM EDT Report Abuse

    I had an discussion with a customer on MPs and told her the exact same thing. She still chose the 10 MP Cancon SX10 over the 8.1 MP Sony H7, but at least she knows.

  • 4 Posted by m_knopp on Tue May 12, 2009 3:07PM EDT Report Abuse

    I am right there with jajohn11 when it comes to DSLR. I have a 12MP DSLR and I love those extra pixels because it allows me to crop photos for better composition while still retaining a high enough pixel count to produce excellent prints. Now, when talking about small digicams, I have a 7MP digicam with a 1/2.5" sensor, and I wouldn't want any more pixels on this size of sensor. It is pushing it as it is. However, the benefit of the small digicams isn't their exceptional picture quality, but their exceptional portability.

  • 5 Posted by compand on Sun May 17, 2009 11:01PM EDT Report Abuse

    What is diffraction limit and airy disc size of those sensors? I suspect 6 MP on 1/2.5" at F/4 is about it. So what's all the other stuff? Just to make the file size bigger? Digicam manufacturers have become a huge con-game. Consumers, for the most part, like reading big numbers without regard to what they really mean. So the con-men fool the gullibles, and it continues on...

More Posts: First Prev 1 2 Next Last

Post a Comment


My Tech

Please enable your browser's cookies to activate the My Tech column.

Also on Yahoo! Tech

Computers Home Office Wi-Fi & Networking Phones & PDAs Cameras & Camcorders TV & Home Theater Portable Audio
 

Question and Answer content at Yahoo! Tech is written by Yahoo! users at Yahoo! Answers. Yahoo! does not evaluate or guarantee the accuracy of any Yahoo! Answers content. For more information, read the Full Disclaimer.

Opinions expressed by the Advisors are their own and do not necessarily reflect the views of Yahoo! Inc. Yahoo! receives no compensation from any manufacturer or distributor nor does it compensate any Advisor for the coverage of any product or service in any Advisor's content.