Tue Feb 20, 2007 6:31PM EST
See Comments (175)
I got these two letters almost back to back, both asking pointed questions about figuring out whether someone else might be on their Wi-Fi network... or how to figure out who owned a nearby wireless network that was unsecured. Take a look.
Rob writes: Is there a program (preferably a free download) that enables me to view the computers (users) connected to a wireless signal at any one particular time?
Meanwhile, Zac writes: One of my poor neighbors has their Linksys router set on default configuration. I can even view their configuration page. I am not wanting to do harm to their network, and I don't want to secure it for them without their knowledge. Is there a way to contact the PC listed under the client list, or a program that takes snapshots of their Internet usage (maybe I could see their email address), so I can get a hold of them?
First, you can find out who's connecting to your Wi-Fi network by looking in the DHCP Client List, which is part of your router's configuration and settings software. Just go to the configuration web page (where you set up encryption and passwords, etc.), and look for the DHCP Client List. You'll see the computer name and MAC address of everyone connected. If something fishy is there, you've got an interloper. Be advised that clever types can get around this rather easily: All you really need to do is use a static IP address instead of a dynamic one and you won't show up on the list. However, most computers use DHCP for simplicity, and any casual hangers-on will certainly be DHCP users.
But let's get more complicated: Say you've found an interloper, or like Zac you've found an open wireless network and want to help the owner close it. How do you connect a MAC address to a name?
It's not easily done. Ultra-hackers use advanced tools or directional antennas to figure out the source of a wireless signal, but those are beyond the reach of most users. (Check out Ethereal and AirSnare if you're determined to go this route. Both are software for experts only and are probably overkill for finding an accidental Wi-Fi leech.)
My best advice for beginners is to simply scour the network to see if you can find any shared computers or drives. You might be able to easily pick up a name or address from a file on the network. (This is probably not completely legal, but neither is using your neighbor's open signal, so tread cautiously here.)
With access to the router (as Zac mentioned), some innocuous tricks to get the owner's attention and let him know that his wireless setup is insecure. For example: Change the SSID (or network name) to heyneighborcall5551212, or turn on parental controls (if the router offers them), redirecting popular URLs like google.com, yahoo.com, msn.com, etc. to something like this page.
Unfortunately there's really no foolproof way to figure out who's on your wireless network, so remember to use security at all times and keep tabs on that DHCP list once in awhile. If your network starts to slow down or you fear a hacker intrusion, check out Ethereal and AirSnare at the links above.
Join in the discussion. Here you'll see the comments in the order they were posted.
Report abuse,,,,,Change your password
im using awireless laptop comp. and it used to be connected to my linksys router but then i tried to remove my internet cable from the router and directly hook it to my laptop for better response. unfortunately, when i was trying to put it back again to my router after 6 months, i dont get any wireless anymore even im in the kitchen or outside the room. please teach me how to bring it back again pls so i can use my wireless again. if u ask me i have strong signal in my linksys, but i get no internet from kitchen or outside the room
listen to kupriaa1
During the setup of just about all wireless routers, setup utility asks if you want like to enable encryption. If you failied to do this then because you didn't know what it was, just reset the router using the reset button on the back of the unit. This will reset it back to factory defaults. Then just run the setup utility again and this time enable the encryption feature. Another way is to just type in the IP address of the router, which if default is usually something like 192.168.1.1, into your web browser. It will prompt for the user name and password. For linksys routers the default user name is left blank and the password is admin. for d-link routers its just the oposite, admin is the user name and the password is left blank. again go into your wireless settings, enable encryption and remember your key. then next time you connect to your wireless network you will be prompted to enter that key. usually the default wireless setting on your computer will save the key automatically and you will never have to enter it again. ok kids, lets put our new found knowledge to work.
The easiest way is to stop broadcasting the SSID. If the SSID is not broadcast, you don't even need to set up WPA or WEP because no one will know it's there.
maaaann I can't get free wireless anymore? what they gonna let us pay for oxygen next?
that kina stinks since i breath free oxygen.
everbody scream WAR DRIVING hella ya
when I set up the encryption the strength of the signal was effected. How do stop broadcasting the SSID? thanks
you can always do what I did for a neighbor. I added thier printer onto my system. I then went into WORD (or NOTEPAD) and type a message like: "Hi there, I am your neighbor, I live in apartment/house ####, I am not a hacker, I am just a concerned neighbor, you might want to secure your wireless connection. If you need help, let me know" They didn't needmy help. I think within an hour or 2, it was secure.
See if you can connect to their printer (if they have one) and print off a letter stating they're a big dummy. One of my instructors had that happen to her once when someone hacked her computer. Or, be frugle and cancel your internet connection and leach off theirs. It's illegal, ONLY IF YOU GET CAUGHT!
A non-broadcasted network can still be found with a sniffer.
following these directions is a recipe for legal trouble
Why is it so taboo to share your wireless with your neighbors and your community? There are ways you can protect your computer and still share the wireless service you are paying for.
How do you find the dhcp info, do not know how to do it
can i ask what is the IP address of linksys? theres a wifi nearby, I don't where it came from or what flat? But sometimes it open to all sometimes it closed. Where do i have supposes to go or what shall i do?
"Just go to the configuration web page (where you set up encryption and passwords, etc.), and look for the DHCP Client List. You'll see the computer name and MAC address of everyone connected. If something fishy is there, you've got an interloper" I set mine up from a CD that I inserted, so what website would I go to to see who is using our router?? Someone is obviously b/c when that connection is enabled, our internet slows down drastically until it eventually wont connect at all....
I am typing this message on someone elses wifi signal. Have been "borrowing" it for 3 years now.
i dont know what all this stuff means, can u possibly elaborate or somethin??
Please enable your browser's cookies to activate the My Tech column.
| Computers | Home Office | Wi-Fi & Networking | Phones & PDAs | Cameras & Camcorders | TV & Home Theater | Portable Audio |
|---|---|---|---|---|---|---|
6 Posted by nickdc1960 on Thu Sep 3, 2009 7:37PM EDT Report Abuse
True story here. I have friends that just bought a new fixer-upper home. The electric is on, but none of the other services have been connected; no land phone, no cable tv. But, when they turned-on their laptop, Shazam! (as Gomer Pile used to say), they were instantly connected to their neighbor's WiFi network! No need to pay the cable company to come over for a hook-up, they've got unlimited internet access 24/7! This is why I like wires. Ask yourself, how many companies are using WiFi to connect their employees to the mainframe? Yep. It's a bad idea, unless you want someone to have access to what the CEO is emailing to the COB. Nick http://www.CreditManagementWorld.com