Who Else Is on Your Wi-Fi Network?

Tue Feb 20, 2007 6:31PM EST

See Comments (175)

I got these two letters almost back to back, both asking pointed questions about figuring out whether someone else might be on their Wi-Fi network... or how to figure out who owned a nearby wireless network that was unsecured. Take a look.

Rob writes:  Is there a program (preferably a free download) that enables me to view the computers (users) connected to a wireless signal at any one particular time?

Meanwhile, Zac writes: One of my poor neighbors has their Linksys router set on default configuration. I can even view their configuration page. I am not wanting to do harm to their network, and I don't want to secure it for them without their knowledge. Is there a way to contact the PC listed under the client list, or a program that takes snapshots of their Internet usage (maybe I could see their email address), so I can get a hold of them?

First, you can find out who's connecting to your Wi-Fi network by looking in the DHCP Client List, which is part of your router's configuration and settings software. Just go to the configuration web page (where you set up encryption and passwords, etc.), and look for the DHCP Client List. You'll see the computer name and MAC address of everyone connected. If something fishy is there, you've got an interloper. Be advised that clever types can get around this rather easily: All you really need to do is use a static IP address instead of a dynamic one and you won't show up on the list. However, most computers use DHCP for simplicity, and any casual hangers-on will certainly be DHCP users.

But let's get more complicated: Say you've found an interloper, or like Zac you've found an open wireless network and want to help the owner close it. How do you connect a MAC address to a name?

It's not easily done. Ultra-hackers use advanced tools or directional antennas to figure out the source of a wireless signal, but those are beyond the reach of most users. (Check out Ethereal and AirSnare if you're determined to go this route. Both are software for experts only and are probably overkill for finding an accidental Wi-Fi leech.)

My best advice for beginners is to simply scour the network to see if you can find any shared computers or drives. You might be able to easily pick up a name or address from a file on the network. (This is probably not completely legal, but neither is using your neighbor's open signal, so tread cautiously here.)

With access to the router (as Zac mentioned), some innocuous tricks to get the owner's attention and let him know that his wireless setup is insecure. For example: Change the SSID (or network name) to heyneighborcall5551212, or turn on parental controls (if the router offers them), redirecting popular URLs like google.com, yahoo.com, msn.com, etc. to something like this page.

Unfortunately there's really no foolproof way to figure out who's on your wireless network, so remember to use security at all times and keep tabs on that DHCP list once in awhile. If your network starts to slow down or you fear a hacker intrusion, check out Ethereal and AirSnare at the links above.

Comments on Who Else Is on Your Wi-Fi Network?

Post a Comment

Join in the discussion. Here you'll see the comments in the order they were posted.

  • 1 Posted by shutrbug@sbcglobal.net on Thu Sep 3, 2009 9:21PM EDT Report Abuse

    Good idea, changing the SSID. I'd change it to PleaseChangeUrPassword or something like that.

  • 2 Posted by pete6584017 on Thu Sep 3, 2009 8:07PM EDT Report Abuse

    i've only been on the router site a few times and am a bit intimidated by the directions. If i change this to secured, I have to enter the MAC address of all adapters/wireless cards, of all users, won't I?

  • 3 Posted by jabraham@pacbell.net on Thu Sep 3, 2009 4:26PM EDT Report Abuse

    If you can get on to your neighbors network and they have any folders shared, simply create a notepad document and name it something obvious that would make them want to read it, explain that their network is WIDE open. That should do the trick.

  • 4 Posted by kupriaa1 on Thu Sep 3, 2009 4:54PM EDT Report Abuse

    I would remind everyone that if you change someones SSID that may not know that the changed SSID is there? How would they? Also you run the risk of invading pricay and possible a host of legal issues even if your intentions are true. As far as the static IP idea- some of the linksys types use a proxy ARP to maintain a list even if the address is static based. To best protect yourself you may want to look for devices that offer Intrusion Detection Services (IDS) many of the consumer models may introduce a minimal tool to assist you. This software will alert you if someone connects to your network without your authorization. You may want to check into something like this. As far as Ethereal is concerned, this a dangerous toy. It is a packet sniffer and should not be used without caution- if you use this on someones network this could be a crime.

  • 5 Posted by kupriaa1 on Thu Sep 3, 2009 4:54PM EDT Report Abuse

    i've only been on the router site a few times and am a bit intimidated by the directions. If i change this to secured, I have to enter the MAC address of all adapters/wireless cards, of all users, won't I? The answer to this is no. What you are referring to is MAC filtering. Most network technicians feel this type of filtering is quite useless for the reasons you state. Furthermore, MAC spoofing or cloning is quite simple for many attackers who are determined. Try using WPA-PSK (WiFi Protected Alliance Pre-shared Key). As long as you have Windows XP with Service Pack 2, you will find this pretty simple to use. If you do not have XP or Windows 2000, you may have to examine the software that came with your wireless card.

  • 6 Posted by nickdc1960 on Thu Sep 3, 2009 7:37PM EDT Report Abuse

    True story here. I have friends that just bought a new fixer-upper home. The electric is on, but none of the other services have been connected; no land phone, no cable tv. But, when they turned-on their laptop, Shazam! (as Gomer Pile used to say), they were instantly connected to their neighbor's WiFi network! No need to pay the cable company to come over for a hook-up, they've got unlimited internet access 24/7! This is why I like wires. Ask yourself, how many companies are using WiFi to connect their employees to the mainframe? Yep. It's a bad idea, unless you want someone to have access to what the CEO is emailing to the COB. Nick http://www.CreditManagementWorld.com

  • 8 Posted by jdl_canada on Thu Sep 3, 2009 4:31PM EDT Report Abuse

    im using awireless laptop comp. and it used to be connected to my linksys router but then i tried to remove my internet cable from the router and directly hook it to my laptop for better response. unfortunately, when i was trying to put it back again to my router after 6 months, i dont get any wireless anymore even im in the kitchen or outside the room. please teach me how to bring it back again pls so i can use my wireless again. if u ask me i have strong signal in my linksys, but i get no internet from kitchen or outside the room

  • 10 Posted by thomasvmulligan on Thu Sep 3, 2009 10:08PM EDT Report Abuse

    During the setup of just about all wireless routers, setup utility asks if you want like to enable encryption. If you failied to do this then because you didn't know what it was, just reset the router using the reset button on the back of the unit. This will reset it back to factory defaults. Then just run the setup utility again and this time enable the encryption feature. Another way is to just type in the IP address of the router, which if default is usually something like 192.168.1.1, into your web browser. It will prompt for the user name and password. For linksys routers the default user name is left blank and the password is admin. for d-link routers its just the oposite, admin is the user name and the password is left blank. again go into your wireless settings, enable encryption and remember your key. then next time you connect to your wireless network you will be prompted to enter that key. usually the default wireless setting on your computer will save the key automatically and you will never have to enter it again. ok kids, lets put our new found knowledge to work.

More Posts: First Prev 1 2 3 4 5 Next Last

Post a Comment